Introducing McCormick Tractors

It is our pleasure to make the exciting announcement that Kaweah Equipment Company is now an authorized dealer of the McCormick brand, which offers a wide variety of solid, economical tractor models. From compact work-horses, to over-sized and extravagant power-houses, there’s a McCormick tractor out there for everyone!

We especially look forward to serving our valley’s dairy, farming, and many others’ needs with this product lineup. Call us today and ask about options on a new McCormick!

SAFETY SPOTLIGHT: Scissor Lift Edition

*|MC_PREVIEW_TEXT|*

Share Tweet Forward Kaweah Equipment Co reminds you to always stay safe when working on scissor lifts. Before you start moving around on that lift today, take care to keep safe with these helpful tips: Scissor lifts are safer than ladders when operated properly. Even so, serious injuries and fatalities have occurred due to scissor lift accidents. The most common causes for accidents include tip-overs & electrocutions. Always read the lift's provided user manual in order to learn the proper load limitations, weather tolerances, etc. for that exact model. Before operation, always inspect the work site to ensure proper conditions both on the ground and in the air. Any slight imbalance or instability experienced is amplified when the machine is raised. Proper precautions should be taken when falling object hazards are present, whether that be a hazard to the lift operator, or to pedestrians below. Barricade an area around the lift if necessary. Operating in inclement weather is seriously dangerous. Don't operate the lift outdoors if there is sustained wind in the forecast, or if the lift is covered in ice or snow. Safety inspections should be performed on lifts regularly. If defects are found, the lift should not be used until such defects are repaired. Scissor lifts can be powered by batteries, diesel, or other means—usual safety procedures should be followed regarding which power source the lift is utilizing, i.e. safe battery charging and/or carbon monoxide awareness. Take your team safety to the next level. If you're interested in further training your equipment operators on safe practices & procedures, Kaweah Equipment offers an OSHA-approved Certified Safety Training course on this topic, which covers everything we mentioned today and more. We will happily send one of our Certified Safety Trainers straight to your location, who will guide students through a graded classroom module as well as a real-life driving and/or operation test. Upon completion, persons enrolled will each be issued a unique certificate & ID badge indicating their safety certification, which is valid for 3 full years. Schedule A Safety Training Class Now

SAFETY SPOTLIGHT: Ladder Edition

*|MC_PREVIEW_TEXT|*

Share Tweet Forward Kaweah Equipment Co reminds you to always stay safe when working on ladders. Before you start climbing that ladder today, take care to keep safe with these helpful tips: 300 deaths occur each year from ladder accidents. Most commonly, falls due to haste, poor footware, or lack of attention. It's important to select the right ladder for the job. If the job environment is near electrical equipment, don't select an aluminum or steel ladder The ladder should be tall enough to reach the desired work area without having to use the cap or top-most step. Consider the weight of both the worker and their tools in order to select a ladder with a high enough capacity rating. Before working, both the job site and the ladder itself should be inspected for hazards or damage. If possible, eliminate any worksite hazards. Do not use a ladder that has been damaged. Help prevent damage by storing & transporting the ladder properly. The worker should not try to carry their own tools up to the top of a ladder; they should be handed up by others. Take your team safety to the next level. If you're interested in further training your equipment operators on safe practices & procedures, Kaweah Equipment offers an OSHA-approved Certified Safety Training course on this topic, which covers everything we mentioned today and more. We will happily send one of our Certified Safety Trainers straight to your location, who will guide students through a graded classroom module as well as a real-life driving and/or operation test. Upon completion, persons enrolled will each be issued a unique certificate & ID badge indicating their safety certification, which is valid for 3 full years. Schedule A Safety Training Class Now

Our New Year's Resolutions

*|MC_PREVIEW_TEXT|*

Share Tweet Forward We're ready to kick off the new year with some awesome deals!   2020 has only just begun, and awesome equipment deals are already rolling in! From Jan 1 to Jan 17, get a FREE Rammer or Vib. Plate when you purchase a Wacker Neuson WL32 Wheel Loader—a very popular model for handling a wide range of tough tasks. From Jan 17 to Jan 31, get a FREE Rammer or Vib. Plate when you purchase a Wacker Neuson SW17 Skid Steer—a paradigm of productivity. Both pieces are now available for 0% financing on a 72 month term! Reserve My New Equipment Now In Addition: Low Down Lift Rentals We're also offering special prices on GENIE aerial lifts all month long to kick off the new year. Some models starting as low as $79/day! Call or Email us to inquire further.

SAFETY SPOTLIGHT: Forklift Edition

*|MC_PREVIEW_TEXT|*

Share Tweet Forward Kaweah Equipment Co reminds you to always stay safe when working with your lift truck. Before getting that forklift started up today, take care to keep safe with these helpful tips:   Nearly 100 forklift-related fatalities & 36,000 serious injuries occur every year. 50% of these accidents involved a vehicle tipping over. 20% of these accidents involved pedestrians being struck or crushed. Important tips for preventing tip-overs: Operators should have a constant awareness of the machine's load capacity, center of gravity, stability triangle, etc. These capacities vary based on the truck's current attachment! Work conditions need to be free of slippery areas & obstructing debris. Important tips for preventing pedestrian traffic accidents: Right-of-way should always be given to pedestrians by forklift drivers. Forklift and pedestrian traffic should be split by marked walkways or, if possible, guardrails. If necessary, drivers should have another employee act as a spotter for their path of travel. Other important tips for truck operation: Inspect forklift machinery daily. Don't use a unit if any crack, leak, etc. is discovered! If possible, refrain from using a forklift that runs on a combustion engine within a warehouse, plant or onboard ship that does not have adequate ventilation. Always practice safe and patient procedures for mounting and starting a forklift, as well as parking and dismounting when finished. Fun fact: Forklifts can ride in the elevator! Just be sure the truck's total loaded weight is within the elevator's rated capacity. Also be sure to neutralize all forklift controls while the elevator is operating. Take your team safety to the next level. If you're interested in further training your equipment operators on safe practices & procedures, Kaweah Equipment offers an OSHA-approved Certified Safety Training course on this topic, which covers everything we mentioned today and more. We will happily send one of our Certified Safety Trainers straight to your location, who will guide students through a graded classroom module as well as a real-life driving and/or operation test. Upon completion, persons enrolled will each be issued a unique certificate & ID badge indicating their safety certification, which is valid for 3 full years. Schedule A Safety Training Class Now

Is Your Rammer out of Commission?

*|MC_PREVIEW_TEXT|*

Share Tweet Forward Got a rammer that's fallen by the wayside?   Let us provide a new unit to work for you while we handle the repairs.          You're in a pinch and have deadlines to meet, but your compaction equipment is failing the grade... Not to worry! Kaweah Equipment has you covered.        When you bring any Rammer or Vibratory Plate unit in for service or repairs, take a discounted rate on our ship-shape rental units which can fill in and keep your progress rolling.   Schedule my Service or Rental Now Comment Garrett Casey December 2, 2019 Black Friday All Month Long Garrett Casey December 2, 2019 *|MC_PREVIEW_TEXT|* Share Tweet Forward Take advantage of special savings for the entire month of December Purchase the HJ 5,500 lb pallet jack Only $369 Purchase the Yanmar SA221 Tractor Only $12,995 0% Financing Available! Purchase the BS50 Rammer *minimum QTY 3 Only $2,995 Or the WP1550 Vib. Plate Only $2,195 Sign your unit up for Pre-Season Service Only $495 Claim My Sale Pricing Now Comment Garrett Casey November 11, 2019 SAFETY SPOTLIGHT: Boom Lift Edition Garrett Casey November 11, 2019 *|MC_PREVIEW_TEXT|* Share Tweet Forward Kaweah Equipment Co reminds you to always stay safe when working up high.   Before you get that boom lift started today, take care to keep safe with these helpful tips:   Remember before all else to inspect your work site and lift equipment for safety before operation begins. If any leaks, cracks, deformations or malfunctions are discovered on the unit, avoid operating at all costs! Aerial lifts such as Articulated Booms are generally safer than ladders, but are not without their own risks to be aware of! Over 26 workers are killed each year from aerial lift accidents—nearly 50% of which are either related to electrocution, or falls. Always operate in proper conjunction with power lines, terrain & weather. Operators should always be aware of their load capacity, center of gravity, fall prevention tethering, and surrounding obstacles & structures. Proper shutdown and charging procedures are just as important as pre-operation inspections! Take your team safety to the next level. If you're interested in further training your equipment operators on safe practices & procedures, Kaweah Equipment offers an OSHA-approved Certified Safety Training course on this topic, which covers everything we mentioned today and more. We will happily send one of our Certified Safety Trainers straight to your location, who will guide students through a graded classroom module as well as a real-life driving and/or operation test. Upon completion, persons enrolled will each be issued a unique certificate & ID badge indicating their safety certification, which is valid for 3 full years. Schedule A Safety Training Class Now Comment Garrett Casey November 4, 2019 Lift Your Spirits High Garrett Casey November 4, 2019 *|MC_PREVIEW_TEXT|* Share Tweet Forward This Thanksgiving season, let your hearts be lifted.   The Thanksgiving holiday always reminds us of the most joyful and uplifting memories of the year, as well as it encourages about the bright future ahead. This past year at Kaweah Equipment we've undergone plenty of change & expansion to be thankful for, and we especially enjoy showing appreciation for each and every one of our loyal customers. We want to share the uplifting experience of operating some of this great new machinery, so during this season we're giving rentals at a price to be thankful for.   Through Thanksgiving Day, take a one-week rental of the Genie Z-30/20n Knuckle Boom Lift for only $399. This articulating boom lift offers quiet, emission-free operation in the most sensitive work environments. With its narrow electric lift, operators can easily drive through standard doorways, work close to buildings or around obstacles, and access overhead work from aisles and other congested areas. The Z-30 has a 36 ft max working height, over 21 ft max horizontal reach, and over 12 ft up-and-over clearance, all with a 500 lb platform capacity. There's not much you can't get done with one of these on your jobsite!   Schedule My Rental Now Comment Garrett Casey October 28, 2019 Sale November Compaction Action Garrett Casey October 28, 2019 Sale *|MC_PREVIEW_TEXT|* Share Tweet Forward Score some cost-effective rammer rentals during the month of November.   Calling all builders, diggers, pavers & landscapers! This coming month at Kaweah Equipment we're running a special promotion on Wacker Neuson Rammers & Vibratory Plates, and we've readied a handful of units to put in your hands at a special price. Thru Nov 30, schedule a rental of the BS60-4As Rammer for only $79/day. Also available is the WP1150AW Vibratory Plate for only $49/day. Each model has their own unique strengths & advantages on the worksite. We're looking forward to hearing how much more productivity your team can achieve with one or two extra compactors in the mix. Give us a call, or stop by The Yard to check out the efficacy of these awesome little machines.   Schedule My Rental Now In Case You Missed It: Last week's news Last week, we showed off our new line of GENIE aerial lifts available for rent, and gave an especially noteworthy offer of $199 for a one week rental of the GS-1930 scissor lift. Offer remains available until Nov 8. Call or email us to inquire further! Tagged: Rammers, Vibratory Plates, Compaction Comment Garrett Casey October 22, 2019 NEW TO THE YARD at Kaweah Equipment Co Garrett Casey October 22, 2019 Introducing a staunch new lineup, with an attractive rental offer. Comment Thomas Townsend January 23, 2018 Does my forklift really need a 1000 hour service? Thomas Townsend January 23, 2018 One thing we hear from time-to-time, "do I really need a 1,000 hour service on my forklift?" While that is an understandable question. The equipment may not appear to have anything wrong with it and taking the unit offline might seem counterproductive and costly. There are many reasons the manufacturer's will recommend preventive maintenance, one of the most important is OSHA's requirements. Some other points are to ensure the lift is operating in safe conditions and to increase the up-time of your lift. Preventive maintenance can also extend the life of your forklift OSHA Maintenance Requirement The Occupational Health and Safety Administration (OSHA) requires a preventative maintenance program that ensures equipment is safe for employees. The OSHA standard states that all material handling equipment should be regularly inspected and maintained. What's Included Pre-Season Service Perform 200 point inspection Complete brake inspection Clean and inspect for debris Ignition & electrical inspection Battery cleaning & inspection All fluids changed Attachment inspection Cooling system inspection Fuel Safety Inspection Compression Test Written condition report for OSHA What you give to your lift is what you get out of it. Managers who keep the manufacturer's recommended service guidelines will have lifts that perform well for years and will keep the trade-in value high as well. Neglecting and cutting corners with maintenance leads to breakdowns and costly repairs. We service all makes and models. Schedule your service today! Don't Miss This Great Deal! Get free travel up to 25 miles on a Pre-Season service from Kaweah Equipment. Call us to claim this special! Visalia (559) 733-2982 Paso Robles (805) 888-7311 info@kaweahequipment.com Schedule a Demo Get a Quote Comment Thomas Townsend January 16, 2018 Keep Your Workplace Safe with Linde Blue Spot™ Thomas Townsend January 16, 2018 Blue light for greater safety Safety first! Whether employees are driving a forklift truck or walking, they quickly lose sight of potential risks when working. They may either be inattentive or absorbed in their work. Loud noises are distracting and can drown out important warning signals. This can all cause dangerous accidents on business premises. The innovative Linde BlueSpot™ driving path warning system minimizes risk without making a sound. The LED light of the Linde BlueSpot™, attached to the driver’s protective roof frame, project a blue warning spot onto the ground. This warns pedestrians and other forklift drivers of approaching trucks. This visual solution from Linde Material Handling intuitively draws attention to moving forklift trucks. It therefore significantly increases safety, both in aisles and at crossings where visibility is poor. Unobtrusive but can’t be ignored The Linde BlueSpot™ consists of two bright, anti-glare LED lights that project a blue spot onto the ground. They can be set to either shine constantly or flash. The light spot is positioned several meters ahead of the forklift truck, whether it’s traveling forward or backward. It lasts an impressively long time: The Linde BlueSpot™ lasts for more than 20,000 hours, as the LED technology enables high light intensity with low levels of energy. Benefits at a glance Driving path warning system: Increasing safety in aisles and at crossings with poor visibility Early warning: A spot on the ground well ahead of the truck leaves plenty of time to move out of the way Safety in all directions: Can be used when driving both forward and backward LED technology: Anti-glare, high-intensity light using low levels of energy Long service life: Very low operating temperature Durability: Resistant to shaking, vibrations, and high-pressure cleaning Diversity: LED light with a red or blue light spot or a blue arrow Well-received by drivers and pedestrians: No need for disruptive acoustic warning signals Linde Blue Spot Video A quick video with customer testimonials showing how the Linde Blue Spot™ has improved their safety. Don't Miss This Great Deal! Get 20% Off The Linde Blue Spot™ until 1/23/18 Call us to claim this special! Visalia (559) 733-2982 Paso Robles (805) 888-7311 info@kaweahequipment.com Schedule a Demo Get a Quote 1 Comment Thomas Townsend January 9, 2018 Is It Time to Replace Your Forklift Forks? Thomas Townsend January 9, 2018 Did you know, 29% of independently-inspected forks fail safety standards? Your forklift forks might appear indestructible, however after regular use they will start to become worn out and unsafe. A simple visual inspection is not enough to determine if a fork is safe to use. the ANSI/ITSDF B-561 standards requre that forks must be inspected at least once per calendar year. OSHA also requires all powered industrial trucks, including forks, be examined daily or after each shift if the forklifts are utilized 24/7. Unfortunately it can be easy to skip inspections which can lead to a snapped fork, dropped load and could lead to injuries or even death. How can you prevent such costly and unfortunate situations? Read on for more information. Regular use causes forks to bend, crack, or wear down over time. Forks can also be damaged by: Improper adjustments to the chain Accidents (running into walls, columns, etc). Overloading forks beyond their rated capacity. Want to see if your truck/forks are working beyond their capacity, try this online calculator which can also account for attachments. How to Inspect Forklift Forks Check the angle of the shank and blade - If the shank and blade angle exceed 93 degrees, the fork must be replaced. Do not allow machine shops to bend forks back into place! Ensure blade and shank are straight - If the shank or the blade are bent, the fork can no longer be used. Inspect for surface cracks - Check the entire surface of each fork for cracks. Pro Tip: the heel area and welds are most likely place for cracks to develop. Check height of fork tip - The tips of your two forklift blades should be at roughly the same height. If the difference between the height of each tips exceeds three percent of the length of the blade, the forks need to be replaced. For example, if your for forklift blade is 48-inches long, the difference in height between the two forklift blade cannot exceed 1.44 inches. Check the positioning lock - Ensure the positioning lock and other fork retention devices are working properly. Measure thickness with calipers - The metal on a fork wears down slowly, but eventually the forks can no longer handle their original load capacity. Just 10% wear reduces load capacity by 20%, at which point the forks must be replaced. Using forklift calipers, measure the thickness of your fork blade, heel and hook using the shaft as a starting place. Inspect fork hooks - Using calipers, check for wear and also straightness of fork hooks. If the lip of the hook touches the back of the caliper, the forks must be removed from service. We hope this article contained helpful information. If you have any questions or would like us to inspect your forks for you please contact our service department. We also offer forklift safety training which is required by OSHA for forklift operators. Forklift Fork Inspection Guide A quick guide on using the Cascade Fork Wear Caliper to inspect your forklift or lift truck forks for wear and deformation. Comment Thomas Townsend December 1, 2017 Wacker Skid Steer Goes Head to Head with Bobcat Thomas Townsend December 1, 2017 Watch the video series Trailer Video 1 - Inside the Cab Video 2 - Speed and Productivity Video 3 - Pushing Power Contact us for a quote (559) 733-2982 sales@kaweahequipment.com Schedule a Demo Get a Quote Comment Thomas Townsend November 30, 2017 Kaweah Equipment Awarded Tier 3 Certification Thomas Townsend November 30, 2017 Dennis Faust presenting the Tier 3 Award to Garrett Casey and Ruben Gomez On November 29, 2017, Kaweah Equipment was awarded the Wacker Neuson Tier 3 Dealer Certification. The Tier 3 Certification is the highest level of certification and is awarded only to the Top Dealers in the Wacker Neuson network. This level of certification is awarded to dealers that have exceeded the standards set forth by Wacker Neuson in order to ensure a successful working relation with end-users. The award was presented by Dennis Faust, the Wacker Neuson Dealer Development Specialist for the Pacific Region to Garrett Casey, President and Ruben Gomez, Service Manager of Kaweah Equipment Company. Kaweah Equipment continues to build upon it's reputation and its long legacy of service in the Central Valley. We are committed to providing our employees with the tools and knowledge to succeed in providing excellent support through our customer.  Comment Thomas Townsend November 15, 2017 Rammer / Vibratory Plate Trade-In Program Thomas Townsend November 15, 2017 Receive up to a $500 Trade-In Credit  Push, pull or drag in used rammers and/or plates and receive up to a $500 trade-in credit towards the purchases of select new Wacker Neuson gasoline powered rammers and single direction vibratory plates. Trade in Any Make & Model of Rammer We will accept any make/model Rammer or Vibraplate to provide your trade-in credit. Even if the unit is not functional.  *May not be combined with other offers. Offer only valid for select models.  Contact us for a quote (559) 733-2982 sales@kaweahequipment.com Get a Quote Comment Thomas Townsend November 3, 2017 Forklifts Baoli Releases Two Brand New Forklifts for 2018 Thomas Townsend November 3, 2017 Forklifts Baoli KBE25C 4 Wheel Electric & KBG25c Cushion Tire Forklift Brand new for 2018 are two exciting new models from Baoli, available immediately through Kaweah Equipment Company. KBG25C Baoli is also proud to announce the KBG25C. The KBG25C is a warehouse ready version of the popular KBG25 forklift. Stock configuration includes a 48 volt AC battery, a Triplex mast with a 86" - 186" height and 5° - 6° tilt. Cushion tires. OrangeBelt™ bright orange seat belt for added operator safety. The unit also includes a Bozoni hang on side-shift as well as Front LED headlights, strobe and backup alarm. Other notable features: a comfort suspension seat, lots of leg and foot room, conveniently located hand brake. Some optional features are a 81.5" tall "truckers" mast, 36v battery, integral side-shift, Baoli Safety Orange paint, and more.  KBE25C Another new model for 2018 is a 4 Wheel Electric model. Introducing the KBE25C. The KBE25C is a well designed addition to the Baoli family. Stock configuration includes a 48 volt AC battery, a Triplex mast with a 86" - 186" height and 5° - 6° tilt. Cushion tires. OrangeBelt™ bright orange seat belt for added operator safety. The unit also includes a Bozoni hang on side-shift as well as Front LED headlights, strobe and backup alarm. Other notable features: a comfort suspension seat, lots of leg and foot room, conveniently located hand brake. Some optional features are a 81.5" tall "truckers" mast, 36v battery, integral side-shift, Baoli Safety Orange paint, and more.  Learn more click a model below for more details KBG25C KBE25C Contact us for a quote (559) 733-2982 sales@kaweahequipment.com Tagged: New Equipment, New Models, Baoli, Kion NA, Electric Forklift, Cushion Tire Forklift Comment Thomas Townsend November 1, 2017 Community Help us give to those in need. Join us for this year's Foodlink Food Drive! Thomas Townsend November 1, 2017 Community Join us for the 2017 Community Food Drive for Foodlink!  KJUG will be broadcasting live at Save Mart in Visalia in the Key West Shopping Center at Goshen and Akers on November 19, 20, and 21st collecting food for distribution in our South Valley communities. Bring food to help FOODLINK of TULARE COUNTY.  No child should be hungry during the holidays.  Make a donation, for Foodlink to feed the hungry this holiday season! Tagged: community, food drive, food link, tulare county, kjug, give Comment Thomas Townsend September 28, 2017 Save hours with the VDS-Vertical Digging System from Wacker Thomas Townsend September 28, 2017 Optimum efficiency with VDS. With the development of this peerless system, Wacker Neuson has made an essential contribution towards increased cost-effectiveness of excavator work. The Vertical Digging System (VDS) compensates for height differences on uneven terrain and quickly sets the operator in an upright position. Thus, costs take a tumble. Top Benefits Improved productivity and efficiency: Shorter digging times, thanks to precise vertical excavation. Up to 25% time and material savings when excavating. Up to 25% time and material savings when backfilling. Up to 20% increased stability at 15° tilt and full load. 360° swiveling performance. Upright sitting position, making it easier and more comfortable to operate. Simple and robust design. View fullsize VDS enables progressive tilting of the superstructure by up to 15°. At the touch of a button operators can thus compensate for slopes of up to 27%. Success from "pole position". Improved productivity and efficiency. In addition: Precise vertical digging results in significantly shorter excavation times. Only from Wacker Neuson. Proven Flexibility Proven flexibility is always an advantage. Wacker Neuson's Vertical Digging System (VDS) is a class of its own. The intelligent upgrading of Wacker Neuson's excavators: Technical Data Max. tilt of the superstructure 15° Enhanced user comfort and ergonomics 100% Savings up to 25% Comment Older Posts Back to Top Kaweah Equipment Company, 10725 W Goshen Ave, Visalia, CA 93291, United States(559) 733-2982info@kaweahequipment.com Brands Wacker Neuson Yanmar Linde Genie Harmony Baoli Cushman Karcher Equipment Tractors Forklifts Excavators Skid Steers Wheel Loaders Telehandlers Rollers Services Sales Rentals Parts Service Company About Contact Employment Forms Blog Facebook Kaweah Equipment Co 10725 W Goshen Ave, Visalia, CA 93291 Phone: (559) 733-2982 Paso Robles: (805) 888-7311 Fax: (559) 733-3002

Black Friday All Month Long

*|MC_PREVIEW_TEXT|*

Share Tweet Forward Take advantage of special savings for the entire month of December Purchase the HJ 5,500 lb pallet jack Only $369 Purchase the Yanmar SA221 Tractor Only $12,995 0% Financing Available! Purchase the BS50 Rammer *minimum QTY 3 Only $2,995 Or the WP1550 Vib. Plate Only $2,195 Sign your unit up for Pre-Season Service Only $495 Claim My Sale Pricing Now

SAFETY SPOTLIGHT: Boom Lift Edition

*|MC_PREVIEW_TEXT|*

Share Tweet Forward Kaweah Equipment Co reminds you to always stay safe when working up high.   Before you get that boom lift started today, take care to keep safe with these helpful tips:   Remember before all else to inspect your work site and lift equipment for safety before operation begins. If any leaks, cracks, deformations or malfunctions are discovered on the unit, avoid operating at all costs! Aerial lifts such as Articulated Booms are generally safer than ladders, but are not without their own risks to be aware of! Over 26 workers are killed each year from aerial lift accidents—nearly 50% of which are either related to electrocution, or falls. Always operate in proper conjunction with power lines, terrain & weather. Operators should always be aware of their load capacity, center of gravity, fall prevention tethering, and surrounding obstacles & structures. Proper shutdown and charging procedures are just as important as pre-operation inspections! Take your team safety to the next level. If you're interested in further training your equipment operators on safe practices & procedures, Kaweah Equipment offers an OSHA-approved Certified Safety Training course on this topic, which covers everything we mentioned today and more. We will happily send one of our Certified Safety Trainers straight to your location, who will guide students through a graded classroom module as well as a real-life driving and/or operation test. Upon completion, persons enrolled will each be issued a unique certificate & ID badge indicating their safety certification, which is valid for 3 full years. Schedule A Safety Training Class Now Comment Garrett Casey November 4, 2019 Lift Your Spirits High Garrett Casey November 4, 2019 *|MC_PREVIEW_TEXT|* Share Tweet Forward This Thanksgiving season, let your hearts be lifted.   The Thanksgiving holiday always reminds us of the most joyful and uplifting memories of the year, as well as it encourages about the bright future ahead. This past year at Kaweah Equipment we've undergone plenty of change & expansion to be thankful for, and we especially enjoy showing appreciation for each and every one of our loyal customers. We want to share the uplifting experience of operating some of this great new machinery, so during this season we're giving rentals at a price to be thankful for.   Through Thanksgiving Day, take a one-week rental of the Genie Z-30/20n Knuckle Boom Lift for only $399. This articulating boom lift offers quiet, emission-free operation in the most sensitive work environments. With its narrow electric lift, operators can easily drive through standard doorways, work close to buildings or around obstacles, and access overhead work from aisles and other congested areas. The Z-30 has a 36 ft max working height, over 21 ft max horizontal reach, and over 12 ft up-and-over clearance, all with a 500 lb platform capacity. There's not much you can't get done with one of these on your jobsite!   Schedule My Rental Now Comment Garrett Casey October 28, 2019 Sale November Compaction Action Garrett Casey October 28, 2019 Sale *|MC_PREVIEW_TEXT|* Share Tweet Forward Score some cost-effective rammer rentals during the month of November.   Calling all builders, diggers, pavers & landscapers! This coming month at Kaweah Equipment we're running a special promotion on Wacker Neuson Rammers & Vibratory Plates, and we've readied a handful of units to put in your hands at a special price. Thru Nov 30, schedule a rental of the BS60-4As Rammer for only $79/day. Also available is the WP1150AW Vibratory Plate for only $49/day. Each model has their own unique strengths & advantages on the worksite. We're looking forward to hearing how much more productivity your team can achieve with one or two extra compactors in the mix. Give us a call, or stop by The Yard to check out the efficacy of these awesome little machines.   Schedule My Rental Now In Case You Missed It: Last week's news Last week, we showed off our new line of GENIE aerial lifts available for rent, and gave an especially noteworthy offer of $199 for a one week rental of the GS-1930 scissor lift. Offer remains available until Nov 8. Call or email us to inquire further! Tagged: Rammers, Vibratory Plates, Compaction Comment Garrett Casey October 22, 2019 NEW TO THE YARD at Kaweah Equipment Co Garrett Casey October 22, 2019 Introducing a staunch new lineup, with an attractive rental offer. Comment Thomas Townsend January 23, 2018 Does my forklift really need a 1000 hour service? Thomas Townsend January 23, 2018 One thing we hear from time-to-time, "do I really need a 1,000 hour service on my forklift?" While that is an understandable question. The equipment may not appear to have anything wrong with it and taking the unit offline might seem counterproductive and costly. There are many reasons the manufacturer's will recommend preventive maintenance, one of the most important is OSHA's requirements. Some other points are to ensure the lift is operating in safe conditions and to increase the up-time of your lift. Preventive maintenance can also extend the life of your forklift OSHA Maintenance Requirement The Occupational Health and Safety Administration (OSHA) requires a preventative maintenance program that ensures equipment is safe for employees. The OSHA standard states that all material handling equipment should be regularly inspected and maintained. What's Included Pre-Season Service Perform 200 point inspection Complete brake inspection Clean and inspect for debris Ignition & electrical inspection Battery cleaning & inspection All fluids changed Attachment inspection Cooling system inspection Fuel Safety Inspection Compression Test Written condition report for OSHA What you give to your lift is what you get out of it. Managers who keep the manufacturer's recommended service guidelines will have lifts that perform well for years and will keep the trade-in value high as well. Neglecting and cutting corners with maintenance leads to breakdowns and costly repairs. We service all makes and models. Schedule your service today! Don't Miss This Great Deal! Get free travel up to 25 miles on a Pre-Season service from Kaweah Equipment. Call us to claim this special! Visalia (559) 733-2982 Paso Robles (805) 888-7311 info@kaweahequipment.com Schedule a Demo Get a Quote Comment Thomas Townsend January 16, 2018 Keep Your Workplace Safe with Linde Blue Spot™ Thomas Townsend January 16, 2018 Blue light for greater safety Safety first! Whether employees are driving a forklift truck or walking, they quickly lose sight of potential risks when working. They may either be inattentive or absorbed in their work. Loud noises are distracting and can drown out important warning signals. This can all cause dangerous accidents on business premises. The innovative Linde BlueSpot™ driving path warning system minimizes risk without making a sound. The LED light of the Linde BlueSpot™, attached to the driver’s protective roof frame, project a blue warning spot onto the ground. This warns pedestrians and other forklift drivers of approaching trucks. This visual solution from Linde Material Handling intuitively draws attention to moving forklift trucks. It therefore significantly increases safety, both in aisles and at crossings where visibility is poor. Unobtrusive but can’t be ignored The Linde BlueSpot™ consists of two bright, anti-glare LED lights that project a blue spot onto the ground. They can be set to either shine constantly or flash. The light spot is positioned several meters ahead of the forklift truck, whether it’s traveling forward or backward. It lasts an impressively long time: The Linde BlueSpot™ lasts for more than 20,000 hours, as the LED technology enables high light intensity with low levels of energy. Benefits at a glance Driving path warning system: Increasing safety in aisles and at crossings with poor visibility Early warning: A spot on the ground well ahead of the truck leaves plenty of time to move out of the way Safety in all directions: Can be used when driving both forward and backward LED technology: Anti-glare, high-intensity light using low levels of energy Long service life: Very low operating temperature Durability: Resistant to shaking, vibrations, and high-pressure cleaning Diversity: LED light with a red or blue light spot or a blue arrow Well-received by drivers and pedestrians: No need for disruptive acoustic warning signals Linde Blue Spot Video A quick video with customer testimonials showing how the Linde Blue Spot™ has improved their safety. Don't Miss This Great Deal! Get 20% Off The Linde Blue Spot™ until 1/23/18 Call us to claim this special! Visalia (559) 733-2982 Paso Robles (805) 888-7311 info@kaweahequipment.com Schedule a Demo Get a Quote 1 Comment Thomas Townsend January 9, 2018 Is It Time to Replace Your Forklift Forks? Thomas Townsend January 9, 2018 Did you know, 29% of independently-inspected forks fail safety standards? Your forklift forks might appear indestructible, however after regular use they will start to become worn out and unsafe. A simple visual inspection is not enough to determine if a fork is safe to use. the ANSI/ITSDF B-561 standards requre that forks must be inspected at least once per calendar year. OSHA also requires all powered industrial trucks, including forks, be examined daily or after each shift if the forklifts are utilized 24/7. Unfortunately it can be easy to skip inspections which can lead to a snapped fork, dropped load and could lead to injuries or even death. How can you prevent such costly and unfortunate situations? Read on for more information. Regular use causes forks to bend, crack, or wear down over time. Forks can also be damaged by: Improper adjustments to the chain Accidents (running into walls, columns, etc). Overloading forks beyond their rated capacity. Want to see if your truck/forks are working beyond their capacity, try this online calculator which can also account for attachments. How to Inspect Forklift Forks Check the angle of the shank and blade - If the shank and blade angle exceed 93 degrees, the fork must be replaced. Do not allow machine shops to bend forks back into place! Ensure blade and shank are straight - If the shank or the blade are bent, the fork can no longer be used. Inspect for surface cracks - Check the entire surface of each fork for cracks. Pro Tip: the heel area and welds are most likely place for cracks to develop. Check height of fork tip - The tips of your two forklift blades should be at roughly the same height. If the difference between the height of each tips exceeds three percent of the length of the blade, the forks need to be replaced. For example, if your for forklift blade is 48-inches long, the difference in height between the two forklift blade cannot exceed 1.44 inches. Check the positioning lock - Ensure the positioning lock and other fork retention devices are working properly. Measure thickness with calipers - The metal on a fork wears down slowly, but eventually the forks can no longer handle their original load capacity. Just 10% wear reduces load capacity by 20%, at which point the forks must be replaced. Using forklift calipers, measure the thickness of your fork blade, heel and hook using the shaft as a starting place. Inspect fork hooks - Using calipers, check for wear and also straightness of fork hooks. If the lip of the hook touches the back of the caliper, the forks must be removed from service. We hope this article contained helpful information. If you have any questions or would like us to inspect your forks for you please contact our service department. We also offer forklift safety training which is required by OSHA for forklift operators. Forklift Fork Inspection Guide A quick guide on using the Cascade Fork Wear Caliper to inspect your forklift or lift truck forks for wear and deformation. Comment Thomas Townsend December 1, 2017 Wacker Skid Steer Goes Head to Head with Bobcat Thomas Townsend December 1, 2017 Watch the video series Trailer Video 1 - Inside the Cab Video 2 - Speed and Productivity Video 3 - Pushing Power Contact us for a quote (559) 733-2982 sales@kaweahequipment.com Schedule a Demo Get a Quote Comment Thomas Townsend November 30, 2017 Kaweah Equipment Awarded Tier 3 Certification Thomas Townsend November 30, 2017 Dennis Faust presenting the Tier 3 Award to Garrett Casey and Ruben Gomez On November 29, 2017, Kaweah Equipment was awarded the Wacker Neuson Tier 3 Dealer Certification. The Tier 3 Certification is the highest level of certification and is awarded only to the Top Dealers in the Wacker Neuson network. This level of certification is awarded to dealers that have exceeded the standards set forth by Wacker Neuson in order to ensure a successful working relation with end-users. The award was presented by Dennis Faust, the Wacker Neuson Dealer Development Specialist for the Pacific Region to Garrett Casey, President and Ruben Gomez, Service Manager of Kaweah Equipment Company. Kaweah Equipment continues to build upon it's reputation and its long legacy of service in the Central Valley. We are committed to providing our employees with the tools and knowledge to succeed in providing excellent support through our customer.  Comment Thomas Townsend November 15, 2017 Rammer / Vibratory Plate Trade-In Program Thomas Townsend November 15, 2017 Receive up to a $500 Trade-In Credit  Push, pull or drag in used rammers and/or plates and receive up to a $500 trade-in credit towards the purchases of select new Wacker Neuson gasoline powered rammers and single direction vibratory plates. Trade in Any Make & Model of Rammer We will accept any make/model Rammer or Vibraplate to provide your trade-in credit. Even if the unit is not functional.  *May not be combined with other offers. Offer only valid for select models.  Contact us for a quote (559) 733-2982 sales@kaweahequipment.com Get a Quote Comment Thomas Townsend November 3, 2017 Forklifts Baoli Releases Two Brand New Forklifts for 2018 Thomas Townsend November 3, 2017 Forklifts Baoli KBE25C 4 Wheel Electric & KBG25c Cushion Tire Forklift Brand new for 2018 are two exciting new models from Baoli, available immediately through Kaweah Equipment Company. KBG25C Baoli is also proud to announce the KBG25C. The KBG25C is a warehouse ready version of the popular KBG25 forklift. Stock configuration includes a 48 volt AC battery, a Triplex mast with a 86" - 186" height and 5° - 6° tilt. Cushion tires. OrangeBelt™ bright orange seat belt for added operator safety. The unit also includes a Bozoni hang on side-shift as well as Front LED headlights, strobe and backup alarm. Other notable features: a comfort suspension seat, lots of leg and foot room, conveniently located hand brake. Some optional features are a 81.5" tall "truckers" mast, 36v battery, integral side-shift, Baoli Safety Orange paint, and more.  KBE25C Another new model for 2018 is a 4 Wheel Electric model. Introducing the KBE25C. The KBE25C is a well designed addition to the Baoli family. Stock configuration includes a 48 volt AC battery, a Triplex mast with a 86" - 186" height and 5° - 6° tilt. Cushion tires. OrangeBelt™ bright orange seat belt for added operator safety. The unit also includes a Bozoni hang on side-shift as well as Front LED headlights, strobe and backup alarm. Other notable features: a comfort suspension seat, lots of leg and foot room, conveniently located hand brake. Some optional features are a 81.5" tall "truckers" mast, 36v battery, integral side-shift, Baoli Safety Orange paint, and more.  Learn more click a model below for more details KBG25C KBE25C Contact us for a quote (559) 733-2982 sales@kaweahequipment.com Tagged: New Equipment, New Models, Baoli, Kion NA, Electric Forklift, Cushion Tire Forklift Comment Thomas Townsend November 1, 2017 Community Help us give to those in need. Join us for this year's Foodlink Food Drive! Thomas Townsend November 1, 2017 Community Join us for the 2017 Community Food Drive for Foodlink!  KJUG will be broadcasting live at Save Mart in Visalia in the Key West Shopping Center at Goshen and Akers on November 19, 20, and 21st collecting food for distribution in our South Valley communities. Bring food to help FOODLINK of TULARE COUNTY.  No child should be hungry during the holidays.  Make a donation, for Foodlink to feed the hungry this holiday season! Tagged: community, food drive, food link, tulare county, kjug, give Comment Thomas Townsend September 28, 2017 Save hours with the VDS-Vertical Digging System from Wacker Thomas Townsend September 28, 2017 Optimum efficiency with VDS. With the development of this peerless system, Wacker Neuson has made an essential contribution towards increased cost-effectiveness of excavator work. The Vertical Digging System (VDS) compensates for height differences on uneven terrain and quickly sets the operator in an upright position. Thus, costs take a tumble. Top Benefits Improved productivity and efficiency: Shorter digging times, thanks to precise vertical excavation. Up to 25% time and material savings when excavating. Up to 25% time and material savings when backfilling. Up to 20% increased stability at 15° tilt and full load. 360° swiveling performance. Upright sitting position, making it easier and more comfortable to operate. Simple and robust design. View fullsize VDS enables progressive tilting of the superstructure by up to 15°. At the touch of a button operators can thus compensate for slopes of up to 27%. Success from "pole position". Improved productivity and efficiency. In addition: Precise vertical digging results in significantly shorter excavation times. Only from Wacker Neuson. Proven Flexibility Proven flexibility is always an advantage. Wacker Neuson's Vertical Digging System (VDS) is a class of its own. The intelligent upgrading of Wacker Neuson's excavators: Technical Data Max. tilt of the superstructure 15° Enhanced user comfort and ergonomics 100% Savings up to 25% Comment Older Posts Back to Top Kaweah Equipment Company, 10725 W Goshen Ave, Visalia, CA 93291, United States(559) 733-2982info@kaweahequipment.com Brands Wacker Neuson Yanmar Linde Genie Harmony Baoli Cushman Karcher Equipment Tractors Forklifts Excavators Skid Steers Wheel Loaders Telehandlers Rollers Services Sales Rentals Parts Service Company About Contact Employment Forms Blog Facebook Kaweah Equipment Co 10725 W Goshen Ave, Visalia, CA 93291 Phone: (559) 733-2982 Paso Robles: (805) 888-7311 Fax: (559) 733-3002

Lift Your Spirits High

*|MC_PREVIEW_TEXT|*

Share Tweet Forward This Thanksgiving season, let your hearts be lifted.   The Thanksgiving holiday always reminds us of the most joyful and uplifting memories of the year, as well as it encourages about the bright future ahead. This past year at Kaweah Equipment we've undergone plenty of change & expansion to be thankful for, and we especially enjoy showing appreciation for each and every one of our loyal customers. We want to share the uplifting experience of operating some of this great new machinery, so during this season we're giving rentals at a price to be thankful for.   Through Thanksgiving Day, take a one-week rental of the Genie Z-30/20n Knuckle Boom Lift for only $399. This articulating boom lift offers quiet, emission-free operation in the most sensitive work environments. With its narrow electric lift, operators can easily drive through standard doorways, work close to buildings or around obstacles, and access overhead work from aisles and other congested areas. The Z-30 has a 36 ft max working height, over 21 ft max horizontal reach, and over 12 ft up-and-over clearance, all with a 500 lb platform capacity. There's not much you can't get done with one of these on your jobsite!   Schedule My Rental Now

November Compaction Action

*|MC_PREVIEW_TEXT|*

Does my forklift really need a 1000 hour service?

One thing we hear from time-to-time, "do I really need a 1,000 hour service on my forklift?" While that is an understandable question. The equipment may not appear to have anything wrong with it and taking the unit offline might seem counterproductive and costly.

There are many reasons the manufacturer's will recommend preventive maintenance, one of the most important is OSHA's requirements. Some other points are to ensure the lift is operating in safe conditions and to increase the up-time of your lift. Preventive maintenance can also extend the life of your forklift

OSHA Maintenance Requirement

The Occupational Health and Safety Administration (OSHA) requires a preventative maintenance program that ensures equipment is safe for employees. The OSHA standard states that all material handling equipment should be regularly inspected and maintained.

What's Included

Pre-Season Service

• Perform 200 point inspection

• Complete brake inspection

• Clean and inspect for debris

• Ignition & electrical inspection

• Battery cleaning & inspection

• All fluids changed

• Attachment inspection

• Cooling system inspection

• Fuel Safety Inspection

• Compression Test

• Written condition report for OSHA

What you give to your lift is what you get out of it. Managers who keep the manufacturer's recommended service guidelines will have lifts that perform well for years and will keep the trade-in value high as well. Neglecting and cutting corners with maintenance leads to breakdowns and costly repairs.

We service all makes and models. Schedule your service today!

Don't Miss This Great Deal!

Get free travel up to 25 miles on a Pre-Season service from Kaweah Equipment.

Call us to claim this special!

---

Visalia (559) 733-2982

Paso Robles (805) 888-7311

info@kaweahequipment.com

Schedule a Demo Get a Quote

Keep Your Workplace Safe with Linde Blue Spot™

Blue light for greater safety

Safety first! Whether employees are driving a forklift truck or walking, they quickly lose sight of potential risks when working. They may either be inattentive or absorbed in their work. Loud noises are distracting and can drown out important warning signals. This can all cause dangerous accidents on business premises. The innovative Linde BlueSpot™ driving path warning system minimizes risk without making a sound.

The LED light of the Linde BlueSpot™, attached to the driver’s protective roof frame, project a blue warning spot onto the ground. This warns pedestrians and other forklift drivers of approaching trucks. This visual solution from Linde Material Handling intuitively draws attention to moving forklift trucks. It therefore significantly increases safety, both in aisles and at crossings where visibility is poor.

Unobtrusive but can’t be ignored

The Linde BlueSpot™ consists of two bright, anti-glare LED lights that project a blue spot onto the ground. They can be set to either shine constantly or flash. The light spot is positioned several meters ahead of the forklift truck, whether it’s traveling forward or backward. It lasts an impressively long time: The Linde BlueSpot™ lasts for more than 20,000 hours, as the LED technology enables high light intensity with low levels of energy.

Benefits at a glance

• Driving path warning system: Increasing safety in aisles and at crossings with poor visibility
• Early warning: A spot on the ground well ahead of the truck leaves plenty of time to move out of the way
• Safety in all directions: Can be used when driving both forward and backward
• LED technology: Anti-glare, high-intensity light using low levels of energy
• Long service life: Very low operating temperature
• Durability: Resistant to shaking, vibrations, and high-pressure cleaning
• Diversity: LED light with a red or blue light spot or a blue arrow
• Well-received by drivers and pedestrians: No need for disruptive acoustic warning signals

Linde Blue Spot Video

A quick video with customer testimonials showing how the Linde Blue Spot™ has improved their safety.

Don't Miss This Great Deal!

Get 20% Off The Linde Blue Spot™ until 1/23/18

Call us to claim this special!

---

Visalia (559) 733-2982

Paso Robles (805) 888-7311

info@kaweahequipment.com

Schedule a Demo Get a Quote

Is It Time to Replace Your Forklift Forks?

Did you know, 29% of independently-inspected forks fail safety standards? Your forklift forks might appear indestructible, however after regular use they will start to become worn out and unsafe.

A simple visual inspection is not enough to determine if a fork is safe to use. the ANSI/ITSDF B-561 standards requre that forks must be inspected at least once per calendar year. OSHA also requires all powered industrial trucks, including forks, be examined daily or after each shift if the forklifts are utilized 24/7.

Unfortunately it can be easy to skip inspections which can lead to a snapped fork, dropped load and could lead to injuries or even death. How can you prevent such costly and unfortunate situations? Read on for more information.

Regular use causes forks to bend, crack, or wear down over time. Forks can also be damaged by:

• Improper adjustments to the chain

• Accidents (running into walls, columns, etc).

• Overloading forks beyond their rated capacity.

Want to see if your truck/forks are working beyond their capacity, try this online calculator which can also account for attachments.

How to Inspect Forklift Forks

• Check the angle of the shank and blade - If the shank and blade angle exceed 93 degrees, the fork must be replaced. Do not allow machine shops to bend forks back into place!

• Ensure blade and shank are straight - If the shank or the blade are bent, the fork can no longer be used.

• Inspect for surface cracks - Check the entire surface of each fork for cracks.
  Pro Tip: the heel area and welds are most likely place for cracks to develop.

• Check height of fork tip - The tips of your two forklift blades should be at roughly the same height. If the difference between the height of each tips exceeds three percent of the length of the blade, the forks need to be replaced. For example, if your for forklift blade is 48-inches long, the difference in height between the two forklift blade cannot exceed 1.44 inches.

• Check the positioning lock - Ensure the positioning lock and other fork retention devices are working properly.

• Measure thickness with calipers - The metal on a fork wears down slowly, but eventually the forks can no longer handle their original load capacity. Just 10% wear reduces load capacity by 20%, at which point the forks must be replaced. Using forklift calipers, measure the thickness of your fork blade, heel and hook using the shaft as a starting place.

• Inspect fork hooks - Using calipers, check for wear and also straightness of fork hooks. If the lip of the hook touches the back of the caliper, the forks must be removed from service.

We hope this article contained helpful information. If you have any questions or would like us to inspect your forks for you please contact our service department. We also offer forklift safety training which is required by OSHA for forklift operators.

Forklift Fork Inspection Guide

A quick guide on using the Cascade Fork Wear Caliper to inspect your forklift or lift truck forks for wear and deformation.

Wacker Skid Steer Goes Head to Head with Bobcat

---

Watch the video series

Trailer

Video 1 - Inside the Cab

Video 2 - Speed and Productivity

Video 3 - Pushing Power

Contact us for a quote

---

(559) 733-2982
sales@kaweahequipment.com

Schedule a Demo Get a Quote

Kaweah Equipment Awarded Tier 3 Certification

Dennis Faust presenting the Tier 3 Award to Garrett Casey and Ruben Gomez

On November 29, 2017, Kaweah Equipment was awarded the Wacker Neuson Tier 3 Dealer Certification. The Tier 3 Certification is the highest level of certification and is awarded only to the Top Dealers in the Wacker Neuson network. This level of certification is awarded to dealers that have exceeded the standards set forth by Wacker Neuson in order to ensure a successful working relation with end-users.

The award was presented by Dennis Faust, the Wacker Neuson Dealer Development Specialist for the Pacific Region to Garrett Casey, President and Ruben Gomez, Service Manager of Kaweah Equipment Company.

Kaweah Equipment continues to build upon it's reputation and its long legacy of service in the Central Valley. We are committed to providing our employees with the tools and knowledge to succeed in providing excellent support through our customer. 

Rammer / Vibratory Plate Trade-In Program

Receive up to a $500 Trade-In Credit 

Push, pull or drag in used rammers and/or plates and receive up to a $500 trade-in credit towards the purchases of select new Wacker Neuson gasoline powered rammers and single direction vibratory plates.

Trade in Any Make & Model of Rammer

We will accept any make/model Rammer or Vibraplate to provide your trade-in credit. Even if the unit is not functional. 

*May not be combined with other offers. Offer only valid for select models. 

Contact us for a quote

---

(559) 733-2982
sales@kaweahequipment.com

Get a Quote

Baoli Releases Two Brand New Forklifts for 2018

Baoli KBE25C 4 Wheel Electric & KBG25c Cushion Tire Forklift

Brand new for 2018 are two exciting new models from Baoli, available immediately through Kaweah Equipment Company.

KBG25C

Baoli is also proud to announce the KBG25C. The KBG25C is a warehouse ready version of the popular KBG25 forklift. Stock configuration includes a 48 volt AC battery, a Triplex mast with a 86" - 186" height and 5° - 6° tilt. Cushion tires. OrangeBelt™ bright orange seat belt for added operator safety. The unit also includes a Bozoni hang on side-shift as well as Front LED headlights, strobe and backup alarm. Other notable features: a comfort suspension seat, lots of leg and foot room, conveniently located hand brake. Some optional features are a 81.5" tall "truckers" mast, 36v battery, integral side-shift, Baoli Safety Orange paint, and more. 

---

KBE25C

Another new model for 2018 is a 4 Wheel Electric model. Introducing the KBE25C. The KBE25C is a well designed addition to the Baoli family. Stock configuration includes a 48 volt AC battery, a Triplex mast with a 86" - 186" height and 5° - 6° tilt. Cushion tires. OrangeBelt™ bright orange seat belt for added operator safety. The unit also includes a Bozoni hang on side-shift as well as Front LED headlights, strobe and backup alarm. Other notable features: a comfort suspension seat, lots of leg and foot room, conveniently located hand brake. Some optional features are a 81.5" tall "truckers" mast, 36v battery, integral side-shift, Baoli Safety Orange paint, and more. 

Learn more

click a model below for more details

KBG25C

KBE25C

Contact us for a quote

---

(559) 733-2982
sales@kaweahequipment.com

Help us give to those in need. Join us for this year's Foodlink Food Drive!

Join us for the 2017 Community Food Drive for Foodlink! 

KJUG will be broadcasting live at Save Mart in Visalia in the Key West Shopping Center at Goshen and Akers on November 19, 20, and 21st collecting food for distribution in our South Valley communities.

Bring food to help FOODLINK of TULARE COUNTY.  No child should be hungry during the holidays.  Make a donation, for Foodlink to feed the hungry this holiday season!

Save hours with the VDS-Vertical Digging System from Wacker

Optimum efficiency with VDS.

With the development of this peerless system, Wacker Neuson has made an essential contribution towards increased cost-effectiveness of excavator work. The Vertical Digging System (VDS) compensates for height differences on uneven terrain and quickly sets the operator in an upright position. Thus, costs take a tumble.

Top Benefits

1. Improved productivity and efficiency: Shorter digging times, thanks to precise vertical excavation.
2. Up to 25% time and material savings when excavating.
3. Up to 25% time and material savings when backfilling.
4. Up to 20% increased stability at 15° tilt and full load.
5. 360° swiveling performance.
6. Upright sitting position, making it easier and more comfortable to operate.
7. Simple and robust design.

View fullsize

VDS enables progressive tilting of the superstructure by up to 15°. At the touch of a button operators can thus compensate for slopes of up to 27%.

Success from "pole position". Improved productivity and efficiency. In addition: Precise vertical digging results in significantly shorter excavation times. Only from Wacker Neuson.

Proven Flexibility

Proven flexibility is always an advantage. Wacker Neuson's Vertical Digging System (VDS) is a class of its own. The intelligent upgrading of Wacker Neuson's excavators:

Technical Data

Max. tilt of the superstructure	15°
Enhanced user comfort and ergonomics	100%
Savings	up to 25%

---